Submersible Pump (80lpm)

5" Stainless Steel Submersible Pump

Manufactured from AISI 304. For use with diesel or biodiesel up to B100, AdBlue or clean water, for irrigation and general pressure boosting where a submersible pump is suitable. They are suitable both for potable water and for irrigation systems. They are available as an automatic (-A) version which has an included float switch, or as a standard version without a float switch.

Make an enquiry

Specifications

  • Maximum working pressure: 10 bar
  • Maximum liquid temperature: 40°C
  • Maximum immersion: 20m (10m with float switch)
  • 230v, 1.5kW. 2HP. 1¼” outlet connection
  • Height 590mm x diameter 138mm

 

Technical features

  • Fitted with double mechanical seals with interposing oil chamber
  • Supplied with 20 m power cord, type H07RN-F
  • Single phase version with float available on request (version “A”)
  • Available in the three phase 230V ±10% 50Hz version
  • Installation: horizontal or vertical

 

Materials of construction

  • External casing, motor casing, casing cover and closing ring: AISI 304
  • Impeller, diffuser and spacer: technopolymer
  • Shaft: AISI 431
  • Upper mechanical seal: carbon/ceramic/Nitrile
  • Lower mechanical seal: SIC/carbon/Nitrile